Untitled Document
logout
home    download
     

         
ФИТИНГИ
> бързи куплунзи
> накрайници за маркучи
> отсекателни клапани
> куплунзи с клапан
> шарнири
> нипели и редукции
 
ТРАНСПОРТ
> бензиновози
> цистерни за насипни товари
> газовози
> цистерни за храни
> цистерни за химикали
> транспортни разходомери
> транспортни помпи
 
СТАНЦИИ
> бензиностанции
> газостанции
> метанстанции
> ведомствени бензиностанции
> сервизно оборудване
> макари и заземяване
 
ИНДУСТРИЯ
> помпи и компресори
> разходомери
> петролни бази
> маркучи
> компенсатори
> бътерфлай кранове
> сферични кранове
> наблюдателни стъкла
> химическо производство
> биодизел
> хранително производство
> LPG терминал
> пристанища
> летища
Пистолети, шарнири и наблюдателни стъкла
Начало > Бензиностанции > Пистолети, шарнири и наблюдателни стъкла

ПИСТОЛЕТИ ЗА КОЛОНКИ

Пистолет ZVA Slimline 2 ZVA Slimline 2
Automatic nozzle DN 19, for flowrate max. 80 l / min. Working pressure 0,5 to 3,5 bar. Temperature range - 20° to + 55° C. Suitable for gasoline ( also with ethanol content ), diesel, fuel oil, biodiesel. Not suitable for viscous oils. safety cut-out attitude valve. Built-in check valve. 2-speed lever latch with removable latch pin EB 280. Body and hose inlet of aluminium. Spout of aluminium, tip of stainless steel. Easy rotating swivel, swivel nut of stainless steel.
 
download

Пистолет ZVA Slimline 2 GR ZVA Slimline 2 GR
Automatic nozzle with vapour recovery, fl owrate up to 45 l / min. Working pressure 0,5 up to 3,5 bar. Tempera tur e range - 20° C up to + 55° C. Suitable for all standard gasoline fuels ( also with ethanol content ). Not suitable for pure alcohol, water and solvents. Venturi controlled automatic shut-off with safety cut-out valve. 2-speed lever latch with removable latch pin EB 280.
 
download

Пистолет ZVA 25 ZVA 25
Patented venturi type automatic shut-off with safety cut-out attitude valve. Built-in check valve. 3-speed lever latch with removable latch pin EB 280. Black cover of soft PVC. Body and spout of aluminium. Guard of composite material or aluminium. Internal parts of stainless steel, bronze and acetal resin. Swivel parts of hot stamped brass. Steel parts galvanized and chromated. Seals of NBR / polyurethane. Weight ≈ 1,5 kg
 
download

Пистолет ZVA 32 ZVA 32
Patented venturi type automatic shut-off with safty cut-out attitude valve. Built-in check valve. 3-speed lever latch with removable latch pin EB 280. Swivel hose inlet DN 32 with self lubricated ball bearing. Black plastic cover. Body, spout and guard of aluminium. Internal parts and swivel of bronze and hot stamed brass. Steel parts galvanized and chromated. Poppet of acetal resin. Seals of NBR / polyurethane. Weight ≈ 2,5 kg
 
download

ZVA AdBlue HV ZVA AdBlue HV
Automatic nozzle ZVA AdBlue HV, of coated aluminium for heavy vehicle refilling with AdBlue ® urea solution to ISO 22241-1 ( Diesel Exhaust Fluid DEF / AUS 32 / ARLA 32 ) . To avoid misfilling, dispensing is only possible in combination with standard conform magnet adapters as ELAFIX 40 which are incorporated within the filler opening of AdBlue vehicle tanks. Flowrate up to 40 l / min, working pressure 0,5 – 3,5 bar, minimum pump output 20 l / min.
 
download

ZVA AdBlue LV ZVA AdBlue LV
Max. flowrate 10 l/min, recommended flowrate at service stations 4 - 5 l/min. For adjusting the flowra - te see installation and operating manual. Required operating pressure ( at the nozzle / hose connection ) 1,5 – 3,5 bar. Operating temperature range -5° C up to +55° C due to the properties of AdBlue ® . Use at lower temperatures only in conjunction with a suitable heating system within the dispenser.
 
download

 

НАБЛЮДАТЕЛНИ СТЪКЛА

SG 1 SG 1
Suitable for ZVA Slimline 2, ZVA Slimline (old) or nozzles of other manufacturers. Installation between swivel and hose fi tting (SG 1" M 34 Al between nozzle body and swivel), application examples see overleaf. Installation in both fl ow directions possible. Body of coated aluminium, sight glass of impact-resistant synthetic glass, seals of polyurethane and NBR. Marking : ELAFLEX · SG 1" Al · EN 13617-1
 
download

SG 1 Propeller SG 1" Propeller
: Materials see SG 1", propeller assembly of stainless steel, POM and brass. The propeller assembly is also available as separate spare part EA 655 for easy retrofi tting. N.B. installation only in fl ow direction G 1 (hose side) − G 2 (nozzle side).Version with Propeller : All SG 1" are also available with an integrated propeller to visualize the fl ow. Additional weight + 2,5 g.
 
download

SG - COAX SG - COAX
Suitable for ZVA Slimline 2 GR, ZVA Slimline 200 GR (old) or vapour recovery nozzles of other manufacturers. Installation between nozzle body and swivel of hose assembly, application example see overleaf. Body of coated aluminium, sight glass of impact-resistant synthetic glass, vapour hose tail and inner parts of POM. Seals of polyurethane, Viton and NBR. Marking : ELAFLEX · SG − COAX Al · EN 13617-1 · Date Code.
 
download

 

Виж още...
Полезни документи