ФИТИНГИ
ТРАНСПОРТ
СТАНЦИИ
ИНДУСТРИЯ
Пистолети, шарнири и наблюдателни стъкла
ZVA Slimline 2
Automatic nozzle DN 19, for flowrate max. 80 l / min. Working pressure 0,5 to 3,5 bar. Temperature range - 20° to + 55° C. Suitable for gasoline ( also with ethanol content ), diesel, fuel oil, biodiesel. Not suitable for viscous oils. safety cut-out attitude valve. Built-in check valve. 2-speed lever latch with removable latch pin EB 280. Body and hose inlet of aluminium. Spout of aluminium, tip of stainless steel. Easy rotating swivel, swivel nut of stainless steel.
Automatic nozzle DN 19, for flowrate max. 80 l / min. Working pressure 0,5 to 3,5 bar. Temperature range - 20° to + 55° C. Suitable for gasoline ( also with ethanol content ), diesel, fuel oil, biodiesel. Not suitable for viscous oils. safety cut-out attitude valve. Built-in check valve. 2-speed lever latch with removable latch pin EB 280. Body and hose inlet of aluminium. Spout of aluminium, tip of stainless steel. Easy rotating swivel, swivel nut of stainless steel.
ZVA 25
Patented venturi type automatic shut-off with safety cut-out attitude valve. Built-in check valve. 3-speed lever latch with removable latch pin EB 280. Black cover of soft PVC. Body and spout of aluminium. Guard of composite material or aluminium. Internal parts of stainless steel, bronze and acetal resin. Swivel parts of hot stamped brass. Steel parts galvanized and chromated. Seals of NBR / polyurethane. Weight ≈ 1,5 kg
Patented venturi type automatic shut-off with safety cut-out attitude valve. Built-in check valve. 3-speed lever latch with removable latch pin EB 280. Black cover of soft PVC. Body and spout of aluminium. Guard of composite material or aluminium. Internal parts of stainless steel, bronze and acetal resin. Swivel parts of hot stamped brass. Steel parts galvanized and chromated. Seals of NBR / polyurethane. Weight ≈ 1,5 kg
ZVA 32
Patented venturi type automatic shut-off with safty cut-out attitude valve. Built-in check valve. 3-speed lever latch with removable latch pin EB 280. Swivel hose inlet DN 32 with self lubricated ball bearing. Black plastic cover. Body, spout and guard of aluminium. Internal parts and swivel of bronze and hot stamed brass. Steel parts galvanized and chromated. Poppet of acetal resin. Seals of NBR / polyurethane. Weight ≈ 2,5 kg
Patented venturi type automatic shut-off with safty cut-out attitude valve. Built-in check valve. 3-speed lever latch with removable latch pin EB 280. Swivel hose inlet DN 32 with self lubricated ball bearing. Black plastic cover. Body, spout and guard of aluminium. Internal parts and swivel of bronze and hot stamed brass. Steel parts galvanized and chromated. Poppet of acetal resin. Seals of NBR / polyurethane. Weight ≈ 2,5 kg
ZVA AdBlue HV
Automatic nozzle ZVA AdBlue HV, of coated aluminium for heavy vehicle refilling with AdBlue ® urea solution to ISO 22241-1 ( Diesel Exhaust Fluid DEF / AUS 32 / ARLA 32 ) . To avoid misfilling, dispensing is only possible in combination with standard conform magnet adapters as ELAFIX 40 which are incorporated within the filler opening of AdBlue vehicle tanks. Flowrate up to 40 l / min, working pressure 0,5 – 3,5 bar, minimum pump output 20 l / min.
Automatic nozzle ZVA AdBlue HV, of coated aluminium for heavy vehicle refilling with AdBlue ® urea solution to ISO 22241-1 ( Diesel Exhaust Fluid DEF / AUS 32 / ARLA 32 ) . To avoid misfilling, dispensing is only possible in combination with standard conform magnet adapters as ELAFIX 40 which are incorporated within the filler opening of AdBlue vehicle tanks. Flowrate up to 40 l / min, working pressure 0,5 – 3,5 bar, minimum pump output 20 l / min.
ZVA AdBlue LV
Max. flowrate 10 l/min, recommended flowrate at service stations 4 - 5 l/min. For adjusting the flowra - te see installation and operating manual. Required operating pressure ( at the nozzle / hose connection ) 1,5 – 3,5 bar. Operating temperature range -5° C up to +55° C due to the properties of AdBlue ® . Use at lower temperatures only in conjunction with a suitable heating system within the dispenser.
Max. flowrate 10 l/min, recommended flowrate at service stations 4 - 5 l/min. For adjusting the flowra - te see installation and operating manual. Required operating pressure ( at the nozzle / hose connection ) 1,5 – 3,5 bar. Operating temperature range -5° C up to +55° C due to the properties of AdBlue ® . Use at lower temperatures only in conjunction with a suitable heating system within the dispenser.
